System Alarm Report - NEC univerge SV9100 Programming Manual

Issue 4.0
Level:
IN
Description
Use Program 90-11 : System Alarm Report to define the details of the system alarm report.
Input Data
Item
No.
02 Report Method
When alarm reports are e-mailed, set this option
to 1. E-mail address set in PRG 90-11-08.
04 --- Not Used ---
06
SMTP Host Name
When alarm reports are e-mailed, set the SMTP
name (ex: smtp.yourisp.com). Contact your ISP
(Internet service provider) for the correct entry if
needed.
07
SMTP Host Port Number
When alarm reports are e-mailed, set the SMTP
host port number. Contact your ISP (Internet
service provider) for the correct entry if needed.
08 To E-mail Address
When alarm reports are e-mailed, set this e-mail
address to where the report should be sent.
09 Reply Address
When alarm reports are e-mailed, set the e-mail
address where replies should be e-mailed.
10 From Address
When alarm reports are e-mailed, set this e-mail
address for the station sending the report.
11
DNS Primary Address
When alarm reports are e-mailed, set the DNS
primary address.
12
DNS Secondary Address
When alarm reports are e-mailed, set the DNS
secondary address.
SV9100 Programming Manual
Program 90 : Maintenance Program
Item

90-11 : System Alarm Report

Input Data
0 = No Report
1 = E-mail Address
Up to 255 Characters
0~65535
Up to 255 Characters
Up to 255 Characters
Up to 255 Characters
0.0.0.0~255.255.255.255
0.0.0.0~255.255.255.255
Default
0
No Setting
25
No Setting
No Setting
No Setting
0.0.0.0
0.0.0.0
2-837