Service Code Setup (For System Administrator) - NEC univerge SV9100 Programming Manual

Issue 4.0

11-10 : Service Code Setup (for System Administrator)

Level:
IN
Description
Use
Program 11-10 : Service Code Setup (for System Administrator)
the System Administrator. You can customize additional Service Codes in Programs 11-11~11-16. The
following chart shows:
The number of each code (01~42).

The function of the Service Code.

The type of telephones that can use the Service Code.

The default entry. For example, dialing Item 26 allows users to force a trunk line to disconnect.

Input Data
Item
No.
01 Night Mode Switching
02
--- Not Used ---
03 Setting the System Time
04 Storing Common Speed Dialing
Numbers
05
Storing Group Speed Dialing
Numbers
06 Setting the Automatic Transfer for
Each Trunk Line
07 Canceling the Automatic Transfer
for Each Trunk Line
08
Setting the Destination for
Automatic Trunk Transfer
09 Charging Cost Display by the
Supervisor
10
--- Not Used ---
11 Entry Credit for Toll Restriction
SV9100 Programming Manual
Program 11 : System Numbering
Item Terminals
MLT, SLT
to customize the Service Codes for
Default
Program
718
MLT 728
MLT 753
MLT 754
MLT 733
MLT 734
MLT 735
MLT Not Set
MLT Not Set
Related
12-xx
20-07-01
24-04-01
24-04-01
24-04-01
2-113