Connecting System Settings - NEC univerge SV9100 Programming Manual

Program 50 : Common Channel Interoffice Signaling
Level:
IN
Description
Use Program 50-02 : Connecting System Settings to define the settings for each CCIS Route ID.
Input Data
CCIS Route ID
Item
Item
No.
01 Port Number of Common
Signaling Channel (T1)
02 Common Signaling
Channel Data Speed
Assignment (T1)
03
Originating Point Code
04 Destination Point Code
(T1)
05
Calling Name Indication
(T1)
06
CCH Package channel
Number
2-632

50-02 : Connecting System Settings

Route ID 1~8: CCIS via DTI
Route ID 9: CCIS via IAD/GCD-PVAA (IP-CCIS)
Description
Specify the Trunk port to send D-channel
information. This program is available for using DTI
package.
Assign the baud rate of Common Signaling Channel
on DTI package.
Assign the Point Code of own side.
Assign the Point Code of destination side on the DTI
link.
Calling name indication is not sent to destination
party if switch is set to 0.
CCT Package Assignment
Program 50 : Common Channel Interoffice Signaling Service
Issue 4.0
Service
Input Data Default
0~400 0
0 = 64Kbps 1
1 = 56Kbps
2 = 48Kbps(1)
3 = 48Kbps(2)
0~16367 0
0~16367 0
1
0 = Disable
1 = Enable
0
0 ~ 4