NEC univerge SV9100 Programming Manual page 252

[1] Normal Function Code (00 ~ 99) (Service Code 751)
Function
Function
Number
#04 Change Restriction Class
#06 Power Saving for Power
Save Group
#07 Fixed Operation Mode
#08 Bluetooth Connect
#09 Bluetooth Path
#11 Major Alarm
#12 Minor Alarm
#13 Calling Party Number
Notification
#14 Multi-Device Support
[2] Appearance Function Level (*00 ~*99) (Service Code 752)
Function
Function
Number
00 ICM Key

01 Trunk Key

02 Trunk Group

03 Virtual Extension Key

04 Park Key

05 LoopKey

2-212
Function Number List (Continued)
Additional Data
One-time Toll Restriction
Power Save Group Number
00~32 (00 = All Groups)
Night Mode Service Group No.
(01~32)
Any number up to 24 digits.
Function Number List
Additional Data
None
Trunk Number (001~400)
Trunk Group Number
(001~100)
Extension Number or
Department Group Number
Park Number (01~64)
0~2 (0:Incoming,
1:Outgoing, 2:Both)
LED Indication
On (Red): Set
Off: Cancel
Fast flash (Red) : – Setup
On (Red): A major alarm has occurred.
On (Red): A minor alarm has occurred.
On (Red): Set
Off: Cancel
On (Red): Set
Off: Cancel
LED Indication
Red On: Off Hook on Intercom Call
Red Blink: Intercom Call on Hold
Red On: Trunk Busy by Another User
Green On: Trunk Busy by Extension
Red On: Trunk Busy by Another User
Green On: Trunk Busy by Extension
Red On: Trunk busy by another user
Slow Blink (Red): Incoming Call
Slow Blink (Red): Call Placed in
Park by Another User
Fast Blink (Green): Extension
Placed Call in Park
Green On: Extension on an active
call.
Program 15 : Extension, Basic Setup
Issue 4.0