Vrs Delayed Message For Irg - NEC univerge SV9100 Programming Manual

Issue 4.0
Level:
IN
Description
Use Program 22-14 : VRS Delayed Message for IRG (Incoming Group Ring) to define for each
incoming ring group the timers, VRS message number and type of tone for VRS Waiting Message.
Input Data
Incoming Ring Group Number
Item
No.
st
01 1 Delayed Message Start Time
Time before the VRS Delay Message is played for
IRG.
st
02 1 Delayed Message Number
VRS message that is used for the 1st Delayed
Message.
st
03
1 Delayed Message Sending Count
This is the number of times the 1st Delay Message
is played. If set to 0, the 1st Delay Message is not
played.
nd
04
2 Delayed Message Number
VRS message that is used for the 2nd Delayed
Message.
nd
05
2 Delayed Message Sending Count
This is the number of times the 2nd Delay
Message is played. If set to 0, the 2nd Delay
Message is not played.
06 Tone Kind at Message Interval
What is heard between the Delay Messages.
07 Disconnect Time After the End of VRS Delayed
Message
Time, after all 2nd Delay Messages are played,
before the caller is disconnected.
SV9100 Programming Manual
Program 22 : Incoming Call Setup

22-14 : VRS Delayed Message for IRG

Item
1~100
Input Data
0~64800 (sec)
0~101
0 = No Message
101 = Fixed Message
0~255 (time)
0~101
0 = No Message
101 = Fixed Message
0~255 (time)
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0 = No Disconnect
1~64800 Seconds
Default
0
0
0
0
0
0
60
2-381