NEC univerge SV9100 Programming Manual page 229

Issue 4.0
Item
No.
21 Virtual Extension Access Mode
(when idle Virtual Extension key
pressed)
Determine whether a Virtual
Extension/Call Arrival Key(CAR)
should function as a DSS key, a
Virtual Extension, or a CAR key.
When DSS (0) is selected, the key
functions as a DSS key to the
extension and for incoming calls to
that extension. When Outgoing (1)
is selected, the key functions as a
virtual extension and can be used
for incoming and outgoing calls.
When Ignore (2) is selected, the
key functions as a CAR key and
can receive incoming calls only.
22 Multiple Incoming From
Intercom and Trunk
If enabled, this affects how a
Hotline key lights, based on the
setting in Program 22-01-01. If
22-01-01 is set to 1 for trunk
priority, the Hotline key lights solid
when a trunk call rings in. If 22-
01-01 is set to 0 for intercom
priority, the Hotline key does not
light for incoming trunk calls, but
lights solid for intercom calls.
If 15-02-22 is disabled, Hotline
keys light solid for any incoming
calls regardless of the setting in
Program 22-01-01.
23 Speed Dial Preview Mode
Define how a speed dial key
functions when pressed. If set to
Preview (0), the speed dial number
can be previewed before dialing. If
set to Outgoing Immediately (1),
the number is dialed immediately.
24
Conference Key Mode
Allow an extension Conf key to be
programmed for Conference or for
Transfer. When set for 1, the user
places a call on hold, dials the
extension to which it should be
transferred, then presses the Conf
key. The call is then transferred.
When set for 0, with an active call,
the user presses the Conf key,
places a second call, then presses
the Conf key twice. All the calls are
then connected.
SV9100 Programming Manual
Item
0 = DSS
1 = Outgoing (OTG)
2 = Ignore
0 = Disable
1 = Enable
0 = Preview
1 = Outgoing Immediately
0 = Conference
1 = Transfer
Input Data
Related
Default
Program
2
1 22-01-01
0
0
2-189