Id Setup For Ip Trunk - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 14-11 : ID Setup for IP Trunk to set the ID of each IP Trunk. This program refers to
incoming and outgoing IP Trunk calls. The ID is sent on an outgoing IP Trunk call. This program is used
only for H.323.
Input Data
Trunk Port Number
Item
No.
01 IP Trunk ID
Conditions
This Data is called IP trunk outgoing call, or IP trunk incoming call.

This ID is notified at IP trunk outgoing call.

It is not notified when ID is 0.

Incoming Call arrives to the trunk port of the same ID as ID notified from the partner system.

Feature Cross Reference

IP Trunk – H.323
2-176
Program 14 : Trunk, Basic Setup
Item Input Data
0~65535
(0 = No setting)

14-11 : ID Setup for IP Trunk

001~400
Default
0
Issue 4.0
Program 14 : Trunk, Basic Setup