Dt800/Dt700 Multiline Logon Information Setup - NEC univerge SV9100 Programming Manual

84-22 : DT800/DT700 Multiline Logon Information Setup

Level:
IN
Description
Use Program 84-22 : DT800/DT700 Multiline Logon Information Setup to set the DT700 Multiline
logon information.
Input Data
Personal ID Index
Item
No.
01 User ID
Input the User ID when using manual or auto
registration (10-46-01).
02 Password
Input the Password when using manual or auto
registration (10-46-01).
IP Multiline terminals only support

numerical user IDs, not alphanumeric.
03
User ID Omission
Input the Personal ID from terminal automatically
when log on again.
04
Log Off
When the registration mode (10-46-01) is set to
manual, and the phone prompts for a login, the
previous user ID appears so the user only has to
enter the password.
When enabled, the extension assigned to the
Personal ID Index can be logged off or overridden
by another IP multiline station or Softphone.
In Manual mode, a user can also log off the IP
phone to allow another user to login with their own
login ID and password. To logoff the IP phone use
the following operation:
Press the "Down Arrow" Soft Key, press the
"Prog" soft key, and then press the "LOGOFF" soft
key.
2-780
Program 84 : Hardware Setup for VoIP
Item
1~960
Input Data
Up to 32 characters
Up to 16 characters
0 = Off
1 = On
0 = Off
1 = On
Program 84 : Hardware Setup for VoIP
Issue 4.0
Default
No Setting
No Setting
0
1