NEC univerge SV9100 Programming Manual page 656

Number Option
To log directly into a specific Subscriber Mailbox, enter the mailbox number in the corresponding
Number option.
For example, to have key 4 log directly into Subscriber Mailbox 305, for key 4 enter LOGON for
the Action and 305 for the corresponding Number.
To have VM8000 InMail request Automated Attendant callers to select a Subscriber Mailbox to log
into, enter N in the corresponding Number option. The key you choose must represent the first digit
in the Subscriber Mailbox numbers.
For example, to have the Automated Attendant request callers enter the number of the
Subscriber Mailbox where they want to log into, for key 3 enter LOGON for the Action and N for
the corresponding Number. When callers dial 3, they hear, Please enter your mailbox number.
To have VM8000 InMail require Automated Attendant callers to enter a Subscriber Mailbox to log
into (without playing an announcement), enter XXX in the corresponding Number option. The key
you choose must represent the first digit in the Subscriber Mailbox numbers.
For example, to allow callers to log onto mailboxes 301~399, for key 3 enter LOGON for the
Action and XXX for the corresponding Number.
To log into any valid Subscriber Mailbox, enter IXXX in the corresponding Number option.
For example, to allow callers to dial 1 plus any Subscriber Mailbox number to log on, for key 1
enter LOGON for the Action and IXXX for the corresponding Number.
Hang Up Action (6) (HNGUP)

When an Automated Attendant caller presses a key assigned to this action, VM8000 InMail says
Goodbye and immediately hangs up.
Number Option
No entry is required in the corresponding Number Option.
GOTO Action – Go to Mailbox (7) (GOTO)

Use this option to provide Automated Attendant callers with the ability to route to Call Routing and
Announcement Mailboxes. For example, a caller can dial a digit for Sales, and then go to the Call
Routing or Announcement Mailbox that provides the dialing options and instructions for Sales.
Number Option
To have Automated Attendant callers dial a single digit to go to a Call Routing or Announcement
Mailbox, enter the mailbox number in the corresponding Number option.
For example, to have key 1 go to Call Routing Mailbox 01, for key 1 enter GOTO for the Action
and 01 for the corresponding Number.
To have VM8000 InMail require Automated Attendant callers to enter a Call Routing or
Announcement Mailbox to go to, enter XXX in the corresponding Number option. The key you
choose must represent the first digit in the mailbox number.
For example, to allow callers to go to mailboxes 000~015, for key 0 enter GOTO for the Action
and XXX for the corresponding Number.
2-616
Issue 4.0
Program 47 : InMail