Incoming Ring Group Assignment For Group - NEC univerge SV9100 Programming Manual

41-03 : Incoming Ring Group Assignment for Group

Level:
SA
Description
In Program 41-03 : Incoming Ring Group Assignment for Group, for each incoming trunk group set
up in Program 22-05, designate which Group (1~64) the trunks should ring for each of the eight Work
Periods. Also use this program to assign an Incoming Trunk Ring Group as priority or normal. Use
Program 41-06 to set up the Work Schedules and Work Periods for trunks. Use Program 41-07 to assign
the Work Schedules to the days of the week.
Input Data
Incoming Ring Group Number
Work Period Mode Number
Item
No.
01
Group Number
02
Night Announcement Service
03 Priority Data
Determine whether or not an incoming call to a trunk
ring group should follow a priority assignment.
2-504
Item
Program 41 : ACD Setup
1~100
1~8
Input Data
0~64
0 = No setting
0 = No
1 = Yes
0, 1~7
0 = No Priority
1 = Highest Priority
7 = Lowest Priority
Issue 1.0
Default
0
0
0
Program 41 : ACD Setup