Vrs Delay Announcement - NEC univerge SV9100 Programming Manual

Level:
SA
Description
Use
Program 41-11 : VRS Delay Announcement
message source for the 1st and 2nd Delay Announcement Messages. Refer to Program 41-08 for more
on setting up the overflow options.
This program is activated when the delay announcement source and options are assigned as VRS in
Program 41-08-03.
Input Data
Group No.
Item
No.
01
Delay Message Start Timer
Input the time before the 1st Delay Message Starts.
02 1st Delay Message Number
Input the VRS Message to be played as the 1st Delay
Message.
03 1st Delay Message Sending Count
Input the number of times the 1st Delay Message is sent.
If set to 0, the message is not played.
04 2nd Delay Message Number
Input the VRS Message to be played as the 2nd Delay
Message.
05 2nd Waiting Message Sending Count
Input the number of times the 2nd Delay Message is sent.
If set to 0, the message is not played.
06 Tone Kind at Message Interval
Input what is heard between the Delay messages.
07
Forced Disconnect Time after the 2nd Delay Message
Set the time, after the last 2nd Delay Message is played,
before the call is disconnected.
2-514

41-11 : VRS Delay Announcement

to assign the VRS message number to use as the
Item
Program 41 : ACD Setup
01~64
Input Data
0~64800 (sec)
0~101
0 = No Message
101 = Fixed Message
0~255
0~101
0 = No Message
101 = Fixed Message
0~255
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0~64800 (sec)
(0 = No Disconnect)
Issue 1.0
Default
0
0
0
0
0
0
60
Program 41 : ACD Setup