Ani/Dnis Service Options - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 34-09 : ANI/DNIS Service Options to define the ANI//DNIS service option setup for E&M
Class of Service.
Input Data
Class of Service
Item
No.
01 Receive Format
Specify the format of the ANI/DNIS data received
from the Telco. Make sure your entry is compatible
with the service the Telco provides. The character 
indicates a delimiter.
If PRG34-01-02 is selected to 2 (MF),

this PRG works only as 4 =*ANI*DNIS*.
02
Delimiter Dial Code
Define the character Telco uses as a delimiter (see
entries 1~5 in Item 1 above). Valid entries are 0~9,
#
, and .
03 Route Setup of Receive Dial
Specify the source of the data the system uses to
route incoming ANI/DNIS calls. If option 2 is
selected, refer to Program 34-09-04.
2-482
Program 34 : Tie Line Setup

34-09 : ANI/DNIS Service Options

Name
01~15
Input Data
0 = Address
1 = ANI
 
2 = DNIS
 
3 = ANI Address
  
4 = ANI DNIS
  
5 = DNIS ANI
  
( = Delimiter Code)

#
1~9, 0, ,

0 = Fixed Route (Item 08)
(No Routing)
1 = Routes on Received
DNIS or Address Data
2 = Routes on Received
ANI Data
Issue 4.0
Default
Related
Program
COS 2~15
0 34-01-02
34-09-02
34-09-01

0 22-09-01
22-11-01
34-09-04
34-09-08
Program 34 : Tie Line Setup