Ip Trunk Data Setup - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 14-18 : IP Trunk Data Setup to define the basic setting of each IP Trunk.
Input Data
Trunk Port Number
Item
No.
01 IP Trunk Type
This indicates the IP Trunk type. (Read
Only)
02
System ID (SIP Trunk)
This indicates NetLink System ID of the
trunk when multiple SIP trunks for
NetLink is enabled. (Read Only)
03
P2P Mode (SIP Trunk)
Select whether or not peer-to-peer
connection method is used for the SIP
Trunk.
04 Video Mode (SIP Trunk)
Select whether or not the Video mode is
used for the SIP Trunk.
05
SIP Profile
2-180
Program 14 : Trunk, Basic Setup
Item
0 = None
1 = SIP
2 = H.323
3 = CCIS
0 ~ 50
0 = Disable
1 = Enable
0 = Disable
1 = Enable
1 = Profile 1
2 = Profile 2
3 = Profile 3
4 = Profile 4
5 = Profile 5
6 = Profile 6


14-18 : IP Trunk Data Setup

001~400
Input Data Default
0
0
0
0
1
With Version 2000
or lower CPU
Software only two
SIP Profiles are
supported.
Issue 4.0
Program 14 : Trunk, Basic Setup