Softkey Display Prompts - NEC univerge SV9100 Programming Manual

Issue 4.0
S 7 U
ECTION SING
Each UNIVERGE SV9100 display telephone provides interactive Softkeys for
intuitive feature access. The options for these keys will automatically change
depending on where you are in the system programming. Simply press the Softkey
located below the option you wish and the display will change accordingly.
Pressing the
S 8 W
ECTION HAT THE
When using a display telephone in programming mode, various Softkey options are
displayed. These keys will allow you to easily select, scan, or move through the
programs.
If you press this
Softkey . . .
SV9100 Programming Manual
S F P
OFTKEYS OR
_
Program Mode
Base Service OP1
               
▲
VOLUME or VOLUME
_
Program Mode
CCIS Hard Mtnance
               
S D
OFTKEY ISPLAY
Table 1-4 Softkey Display Prompts
The system will. . .
back Go back one step in the program display.
You can press VOLUME
backward through a list of programs.

Scroll down through the available programs.

Scroll up through the available programs.
select Select the currently displayed program.

Move the cursor to the left.

Move the cursor to the right.
-1 Move back through the available program options.
+1 Move forward through the available program options.
ROGRAMMING
OP2
▼
scrolls between the menus.
P M
ROMPTS EAN

Softkey Display Prompts

▲
or VOLUME
▼
to scroll forward or
1-7