Dil Assignment - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 22-07 : DIL Assignment to assign the destination extension or Department Calling Group
for each DIL Incoming trunk. A DIL rings an extension directly, without any other Access Map or Ring
Group programming. If an extension has a line key, the DIL rings the line key. If the extension does not
have a line key, the DIL rings CAP keys. Use Program 22-02 to designate a trunk as a DIL. You can
make eight DIL assignments, one for each Night Service mode.
Input Data
Trunk Port Number
Item Day/Night
No. Mode
01 1~8
Conditions
Program 22-02 must be set to four for the trunk.
Feature Cross Reference

Direct Inward Line (DIL)
2-368
Program 22 : Incoming Call Setup
Number of Transferring Destination
Extension Number (maximum eight digits)
Pilot Number

22-07 : DIL Assignment

001~400
Default
No Setting
Program 22 : Incoming Call Setup
Issue 4.0