Daylight Saving Setup - NEC univerge SV9100 Programming Manual

Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-24 : Daylight Saving Setup to set the options for daylight savings. As the telephone
system is used globally, these settings define when the system should automatically adjust for daylight
savings as it applies to the region in which the system is installed.
Input Data
Item
No.
01 Daylight Saving Mode
Enable/Disable the system ability to adjust the
time for daylight savings/standard time.
02 Time for Daylight Saving
Enter the time of day when the system should
adjust for daylight savings time.
03 Start Month (Summer Time)
Enter the month when the system should
adjust the time for daylight savings time
(01~12).
04 Start of Week
Enter the week of the month when the system
should adjust the time for daylight savings
time. The week will start on the day listed in
10-24-05.
05
Start of Week Day
Enter the day of the week when the system
should adjust the time for daylight savings time
(01 = Sunday, 02 = Monday, etc.).
06 End of Month
Enter the month when the system should
adjust the time for standard time (01~12).
07
End of Week
Enter the week of the month when the system
should adjust the time for standard time.
The week will start on the Day listed in
10-24-08.
2-44
Item

10-24 : Daylight Saving Setup

Input Data
0 = Disable
1 = Enable
00:00~23:59
1~12
(Jan = 1, 2 = Feb, etc.)
0 = Last Week of Month
0~5
1~7
(Sun = 1, Mon = 2, etc.)
1~12
(Jan = 1, 2 = Feb, etc.)
0 = Last Week of Month
0~5
Program 10 : System Configuration Setup
Issue 4.0
Default
1
02:00
3
2
1
11
1