Program 14 : Trunk Basic Setup; Basic Trunk Data Setup - NEC ASPILA EX Feature Manual

Program 14 : Trunk Basic Setup

14-01 : Basic Trunk Data Setup

Level:
IN
Description
Input Data
Item
No.
01 Trunk Name
Set the names for trunks. The trunk name
displays at display keysets for incoming
and outgoing calls.
02 Transmit CODEC Gain Type
Use this option to select the CODEC gain
for the trunk. The option sets the amount
of gain (signal amplification) for the trunk
you are programming.
03 Receive CODEC Gain Type
Use this option to select the CODEC gain
for the trunk. The option sets the amount
of gain (signal amplification) for the trunk
you are programming.
04 Transmit Gain Level for Conference
and Transfer Calls
Use this option to select the CODEC gain
type used by the trunk when it is part of an
Unsupervised Conference.
05 Receive Gain Level for Conference and
Transfer Calls
Use this option to select the CODEC gain
type used by the trunk when it is part of an
Unsupervised Conference.
06 SMDR Print Out
Use this option to have the system
include/exclude the trunk you are pro-
gramming form the SMDR printout. See
Program 35-01 and 35-02 for SMDR
printout options.
Aspila EX Software Manual
• Available.
Use Program 14-01 : Basic Trunk Data Setup to set the basic options for each trunk port. Refer
to the chart below for a description of each option, its range and default setting.
Trunk port number
Item
Program 14 : Trunk Basic Setup
14-01 : Basic Trunk Data Setup
Aspila EX
Input Data
Up to 12 characters
1~63
(-15.5 - +15.5dB in
.5dB intervals)
1~63
(-15.5 - +15.5dB in
.5dB intervals)
1~63
(-15.5 - +15.5dB in
.5dB intervals)
1~63
(-15.5 - +15.5dB in
.5dB intervals)
0- No print out
1- Prints out
1-200
Related
Default
Program
26
(-3dB)
26
(-3dB)
26
(-3dB)
26
(-3dB)
0
Programming 539