Using The Cli To Configure Video Parameters - Cisco 2100 Series Configuration Manual

Wireless lan controller
Hide thumbs Also See for 2100 Series:
Table of Contents

Advertisement

Chapter 4
Configuring Controller SettingsWireless Device Access
To configure the number of aggregated voice WMM traffic specification (TSPEC) streams at a specified
Step 11
data rate for the 802.11a or 802.11b/g network, enter this command:
config {802.11a | 802.11b} cac voice stream-size number max-streams mean_datarate
The number range is 1 to 5 voice streams, and the default value is 2. The mean_datarate range is 84 to
91.2 Kbps, and the default value is 84 Kbps.
Step 12
To enable or disable expedited bandwidth requests for the 802.11a or 802.11b/g network, enter this
command:
config {802.11a | 802.11b} exp-bwreq {enable | disable}
Step 13
To enable or disable TSM for the 802.11a or 802.11b/g network, enter this command:
config {802.11a | 802.11b} tsm {enable | disable}
Step 14
To re-enable all WLANs with WMM enabled, enter this command:
config wlan enable wlan_id
To re-enable the radio network, enter this command:
Step 15
config {802.11a | 802.11b} enable network
To save your settings, enter this command:
Step 16
save config

Using the CLI to Configure Video Parameters

Follow these steps to configure video parameters using the CLI.
Step 1
To see all of the WLANs configured on the controller, enter this command:
show wlan summary
To make sure that the WLAN you are planning to modify is configured for WMM and the QoS level is
Step 2
set to Gold, enter this command:
show wlan wlan_id
To disable all WLANs with WMM enabled prior to changing the video parameters, enter this command:
Step 3
config wlan disable wlan_id
To disable the radio network, enter this command:
Step 4
config {802.11a | 802.11b} disable network
To save your settings, enter this command:
Step 5
save config
To enable or disable video CAC for the 802.11a or 802.11b/g network, enter this command:
Step 6
config {802.11a | 802.11b} cac video acm {enable | disable}
OL-17037-01
Configuring Voice and Video Parameters
Cisco Wireless LAN Controller Configuration Guide
4-63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4400 series

Table of Contents