Cisco 2100 Series Configuration Manual page 299

Chapter 5 Configuring Security Solutions
If you are downloading the signature file using a TFTP server, enter the amount of time in seconds before
Step 9
the controller times out while attempting to download the signature file in the Timeout field.
Range: 1 to 254 seconds
Default: 6 seconds
In the File Path field, enter the path of the signature file to be downloaded or uploaded. The default value
Step 10
is "/."
Step 11 In the File Name field, enter the name of the signature file to be downloaded or uploaded.
Note
If you are using an FTP server, follow these steps:
Step 12
a.
b.
c.
Click Download to download the signature file to the controller or Upload to upload the signature file
Step 13
from the controller.
Using the GUI to Enable or Disable IDS Signatures
Follow these steps to enable or disable IDS signatures using the controller GUI.
Click Security > Wireless Protection Policies > Standard Signatures or Custom Signatures. The
Step 1
Standard Signatures page (see
OL-17037-01
When uploading signatures, the controller uses the filename you specify as a base name and then
adds "_std.sig" and "_custom.sig" to it in order to upload both standard and custom signature
files to the TFTP server. For example, if you upload a signature file called "ids1," the controller
automatically generates and uploads both ids1_std.sig and ids1_custom.sig to the TFTP server.
If desired, you can then modify ids1_custom.sig on the TFTP server (making sure to set
"Revision = custom") and download it by itself.
In the Server Login Username field, enter the username to log into the FTP server.
In the Server Login Password field, enter the password to log into the FTP server.
In the Server Port Number field, enter the port number on the FTP server through which the
download occurs. The default value is 21.
Figure 5-58) or the Custom Signatures page appears.
Cisco Wireless LAN Controller Configuration Guide
Configuring IDS
5-111