Cisco 2100 Series Configuration Manual page 216

Configuring TACACS+
Click the .csv file corresponding to the date of the logs you wish to view. The TACACS+ Administration
Step 3
.csv page appears (see
Figure 5-12
This page provides the following information:
The date and time the action was taken
•
The name and assigned role of the user who took the action
•
The group to which the user belongs
•
The specific action that the user took
•
The privilege level of the user who executed the action
•
The IP address of the controller
•
The IP address of the laptop or workstation from which the action was executed
•
Sometimes a single action (or command) is logged multiple times, once for each parameter in the
command. For example, if the user enters the snmp community ipaddr ip_address subnet_mask
community_name command, the IP address may be logged on one line while the subnet mask and
community name are logged as "E." On another line, the subnet mask maybe logged while the IP address
and community name are logged as "E." See the first and third lines in the example in
Cisco Wireless LAN Controller Configuration Guide
5-28
Figure 5-12).
TACACS+ Administration .csv Page on CiscoSecure ACS
Chapter 5 Configuring Security Solutions
Figure
OL-17037-01
5-13.