Cisco 2100 Series Configuration Manual page 671

Chapter 13 Configuring Hybrid REAPWireless Device Access
To specify the number of seconds for the PAC to remain viable, enter this command:
i.
config hreap group group_name radius ap pac-timeout timeout
where timeout is a value between 2 and 4095 seconds (inclusive) or 0. A value of 0, which the default
value, disables the PAC timeout.
To save your changes, enter this command:
Step 5
save config
To see the current list of hybrid-REAP groups, enter this command:
Step 6
show hreap group summary
Information similar to the following appears:
HREAP Group Summary: Count 2
Group Name
Group 1
Group 2
To see the details for a specific hybrid-REAP group, enter this command:
Step 7
show hreap group detail group_name
Information similar to the following appears:
Number of Ap's in Group: 3
00:1d:45:12:f2:24
00:1d:45:12:f7:12
00:1d:a1:ed:9f:84
Group Radius Servers Settings:
Primary Server Index............................ Disabled
Secondary Server Index.......................... Disabled
Group Radius AP Settings:
AP RADIUS server............ Enabled
EAP-FAST Auth............... Enabled
LEAP Auth................... Enabled
Server Key Auto Generated... No
Server Key..................
Authority ID................ 436973636f0000000000000000000000
Authority Info.............. Cisco A_ID
PAC Timeout................. 0
Number of User's in Group: 20
OL-17037-01
# Aps
1
1
AP1240.EW3.f224
AP1240.10.f712
AP1131.23.9f84
<hidden>
1cisco
3cisco
cisco
test10
test12
test14
test2
test4
test6
test8
Joined
Joined
Joined
2cisco
4cisco
test1
test11
test13
test15
test3
test5
test7
test9
Cisco Wireless LAN Controller Configuration Guide
Configuring Hybrid-REAP Groups
13-23