Using The Cli To Assign Login, Login Failure, And Logout Pages Per Wlan - Cisco 2100 Series Configuration Manual

Choosing the Web Authentication Login Page
To establish the priority in which the servers are contacted to perform web authentication, follow these
Step 8
steps. The default order is local, RADIUS, LDAP.
a.
b.
c.
d.
Click Apply to commit your changes.
Step 9
Click Save Configuration to save your changes.
Step 10

Using the CLI to Assign Login, Login Failure, and Logout Pages per WLAN

Using the controller CLI, follow these steps to assign web login, login failure, and logout pages to a
WLAN.
To determine the ID number of the WLAN to which you want to assign a web login, login failure, or
Step 1
logout page, enter this command:
show wlan summary
If you want wireless guest users to log into a customized web login, login failure, or logout page, enter
Step 2
these commands to specify the filename of the web authentication page and the WLAN for which it
should display:
•
•
•
If you want wireless guest users to be redirected to an external server before accessing the web login
Step 3
page, enter this command to specify the URL of the external server:
config wlan custom-web ext-webauth-url ext_web_url wlan_id
Cisco Wireless LAN Controller Configuration Guide
10-22
Highlight the server type (local, RADIUS, or LDAP) that you want to be contacted first in the box
next to the Up and Down buttons.
Click the Up and Down buttons until the desired server type is at the top of the box.
Click the < arrow to move the server type to the priority box on the left.
Repeat these steps to assign priority to the other servers.
config wlan custom-web login-page page_name wlan_id—Defines a customized login page for a
given WLAN.
config wlan custom-web loginfailure-page page_name wlan_id—Defines a customized login
failure page for a given WLAN.
To use the controller's default login failure page, enter this command: config wlan
Note
custom-web loginfailure-page none wlan_id.
config wlan custom-web logout-page page_name wlan_id—Defines a customized logout page for
a given WLAN.
Note To use the controller's default logout page, enter this command: config wlan custom-web
logout-page none wlan_id.
Chapter 10 Managing User Accounts
OL-17037-01