Cisco 2100 Series Configuration Manual page 753

Appendix D Troubleshooting
Figure D-8
Figure D-9
To determine why packets might not be displayed, enter this command:
Step 4
debug packet error {enable | disable}
To display the status of packet debugging, enter this command:
Step 5
show debug packet
Information similar to the following appears:
Status........................................... disabled
Number of packets to display..................... 25
Bytes/packet to display.......................... 0
Packet display format............................ text2pcap
OL-17037-01
Sample Hex2pcap Output
Sample Text2pcap Output
Cisco Wireless LAN Controller Configuration Guide
Using the Debug Facility
D-37