Cisco 2100 Series Configuration Manual page 309

Chapter 5 Configuring Security Solutions
To view the wIPS submode on the access point, enter this command:
1.
show ap config general Cisco_AP
Information similar to the following appears:
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... AP1131:46f2.98ac
...
AP Mode ......................................... Monitor
Public Safety ................................... Disabled
AP SubMode ...................................... WIPS
...
To see the wIPS optimized channel scanning configuration on the access point, enter this command:
2.
show ap monitor-mode summary
Information similar to the following appears:
AP Name
------------------ -------------------- ----------
AP1131:46f2.98ac
To view the wIPS configuration forwarded by WCS to the controller, enter this command:
3.
show wps wips summary
Information similar to the following appears:
Policy Name.............. Default
Policy Version.......... 3
4. To view the current state of wIPS operation on the controller, enter this command:
show wps wips statistics
Information similar to the following appears:
Policy Assignment Requests............ 1
Policy Assignment Responses........... 1
Policy Update Requests................ 0
Policy Update Responses............... 0
Policy Delete Requests................ 0
Policy Delete Responses............... 0
Alarm Updates......................... 13572
Device Updates........................ 8376
Device Update Requests................ 0
Device Update Responses............... 0
Forensic Updates...................... 1001
Invalid WIPS Payloads................. 0
Invalid Messages Received............. 0
NMSP Transmitted Packets.............. 22950
NMSP Transmit Packets Dropped......... 0
NMSP Largest Packet................... 1377
5. To clear the wIPS statistics on the controller, enter this command:
clear stats wps wips
OL-17037-01
Ethernet MAC Status
00:16:46:f2:98:ac wIPS
Cisco Wireless LAN Controller Configuration Guide
Configuring wIPS
Disabled
Scanning Channel List
------------------------
1, 6, NA, NA
5-121