Cisco 2100 Series Configuration Manual page 250

Configuring and Applying Access Control Lists
Figure 5-35
From the Override Interface ACL drop-down box, choose the ACL that you want to apply to this WLAN.
Step 4
The ACL that you choose overrides any ACL that is configured for the interface. None is the default
value.
Note
Click Apply to commit your changes.
Step 5
Click Save Configuration to save your changes.
Step 6
Applying a Preauthentication Access Control List to a WLAN
Follow these steps to apply a preauthentication ACL to a WLAN using the controller GUI.
Click WLANs to open the WLANs page.
Step 1
Click the ID number of the desired WLAN to open the WLANs > Edit page.
Step 2
Step 3 Click the Security and Layer 3 tabs to open the WLANs > Edit (Security > Layer 3) page (see
Figure
Figure 5-36
Cisco Wireless LAN Controller Configuration Guide
5-62
WLANs > Edit (Advanced) Page
See Chapter 6 for more information on configuring WLANs.
5-36).
WLANs > Edit (Security > Layer 3) Page
Chapter 5 Configuring Security Solutions
OL-17037-01