Using The Cli To View Mobility Group Statistics - Cisco 2100 Series Configuration Manual

Chapter 12 Configuring Mobility GroupsWireless Device Access
Table 12-1
Parameter
Mobility Responder Statistics
Step 3 If you want to clear the current mobility statistics, click Clear Stats.

Using the CLI to View Mobility Group Statistics

Using the controller CLI, follow these steps to view mobility group statistics.
To view mobility group statistics, enter this command:
Step 1
show mobility statistics
Refer to
Step 2
If you want to clear the current mobility statistics, enter this command:
Step 3
clear stats mobility
OL-17037-01
Mobility Statistics (continued)
Handoff Requests Ignored
Ping Pong Handoff Requests
Dropped
Handoff Requests Dropped
Handoff Requests Denied
Client Handoff as Local
Client Handoff as Foreign
Anchor Requests Received
Anchor Requests Denied
Anchor Requests Granted
Anchor Transferred
Table 12-1 for a description of each statistic.
Description
The number of handoff requests or client announcements that were
ignored because the controller had no knowledge of that client.
The number of handoff requests that were denied because the
handoff period was too short (3 seconds).
The number of handoff requests that were dropped due to either an
incomplete knowledge of the client or a problem with the packet.
The number of handoff requests that were denied.
The number of handoff responses sent while the client is in the local
role.
The number of handoff responses sent while the client is in the
foreign role.
The number of anchor requests received.
The number of anchor requests denied.
The number of anchor requests granted.
The number of anchors transferred because the client has moved
from a foreign controller to a controller on the same subnet as the
current anchor.
Cisco Wireless LAN Controller Configuration Guide
Viewing Mobility Group Statistics
12-19