Choosing The Default Web Authentication Login Page; Using The Gui To Choose The Default Web Authentication Login Page - Cisco 2100 Series Configuration Manual

Choosing the Web Authentication Login Page

Choosing the Default Web Authentication Login Page

If you want to use the default web authentication login page as is (see
modifications, follow the instructions in the GUI or CLI procedure below.

Using the GUI to Choose the Default Web Authentication Login Page

Click Security > Web Auth > Web Login Page to open the Web Login page (see
Step 1
Figure 10-10
From the Web Authentication Type drop-down box, choose Internal (Default).
Step 2
If you want to use the default web authentication login page as is, go to
Step 3
the default login page, go to
If you want to hide the Cisco logo that appears in the top right corner of the default page, choose the
Step 4
Cisco Logo Hide option. Otherwise, click the Show option.
If you want the user to be directed to a particular URL (such as the URL for your company) after login,
Step 5
enter the desired URL (such as www.AcompanyBC.com) in the Redirect URL After Login field. You
can enter up to 254 characters.
Note
Step 6 If you want to create your own headline on the login page, enter the desired text in the Headline field.
You can enter up to 127 characters. The default headline is "Welcome to the Cisco wireless network."
Cisco Wireless LAN Controller Configuration Guide
10-10
Web Login Page
Step 4.
The controller supports web authentication redirects only to HTTP (HTTP over TCP) servers. It
does not support web authentication redirects to HTTPS (HTTP over SSL) servers.
Chapter 10 Managing User Accounts
Figure 10-8) or with a few
Figure 10-10).
Step 8. If you want to modify
OL-17037-01