Cisco 2100 Series Configuration Manual page 193

Chapter 5 Configuring Security Solutions
Figure 5-1
In the AAA Client Hostname field, enter the name of your controller.
Step 3
In the AAA Client IP Address field, enter the IP address of your controller.
Step 4
In the Shared Secret field, enter the shared secret key to be used for authentication between the server
Step 5
and the controller.
Note
Choose RADIUS (Cisco Aironet) from the Authenticate Using drop-down box.
Step 6
Click Submit + Apply to save your changes.
Step 7
Click Interface Configuration on the ACS main page.
Step 8
Click RADIUS (Cisco Aironet). The RADIUS (Cisco Aironet) page appears.
Step 9
Under User Group, check the Cisco-Aironet-Session-Timeout check box.
Step 10
Step 11 Click Submit to save your changes.
Step 12 Click System Configuration on the ACS main page.
Step 13 Click Logging.
When the Logging Configuration page appears, enable all of the events that you want to be logged and
Step 14
save your changes.
Step 15 Click Group Setup on the ACS main page.
OL-17037-01
Add AAA Client Page on CiscoSecure ACS
The shared secret key must be the same on both the server and the controller.
Cisco Wireless LAN Controller Configuration Guide
Configuring RADIUS
5-5