Using The Gui To Configure Web Redirect - Cisco 2100 Series Configuration Manual

Chapter 6 Configuring WLANsWireless Device Access
Figure 6-23 ACS Server Configuration
Step 4 Check the [009\001] cisco-av-pair check box.
Enter the following Cisco AV-pairs in the [009\001] cisco-av-pair edit box to specify the URL to which
Step 5
the user is redirected and, if configuring conditional web redirect, the conditions under which the
redirect takes place, respectively:
url-redirect=http://url
url-redirect-acl=acl_name

Using the GUI to Configure Web Redirect

Using the controller GUI, follow these steps to configure conditional or splash page web redirect.
Click WLANs to open the WLANs page.
Step 1
Click the ID number of the desired WLAN. The WLANs > Edit page appears.
Step 2
Click the Security and Layer 2 tabs to open the WLANs > Edit (Security > Layer 2) page.
Step 3
Choose 802.1X or WPA+WPA2 from the Layer 2 Security drop-down box.
Step 4
OL-17037-01
Cisco Wireless LAN Controller Configuration Guide
Configuring WLANs
6-51