Setting Up The Edca Parameters Profile; Configuration For 5 Ghz; Configuration For Or 2.4 Ghz - Cisco 2100 Series Configuration Manual
Cisco 8500 series
wireless lan controller
Hide thumbs
Also See for 2100 Series:
- Configuration manual (796 pages) ,
- Quick start manual (12 pages) ,
- Quick start manual (49 pages)
Table of Contents
Advertisement
Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
Setting up the EDCA parameters profile
The EDCA parameters must be set to the WMM setting after the WLAN network QoS has been
set.
Configuration for 5 GHz
1
In the navigation pane under 802.11a/n, select EDCA Parameters.
2
Ensure that WMM is selected from the drop-down list.
3
Click Apply.
Configuration for or 2.4 GHz
1
In the navigation pane under 802.11b/g/n, select EDCA Parameters.
2
Ensure that WMM is selected from the drop-down list.
3
Click Apply.
Congratulations! The Cisco controller and its AP's are now set up for interoperability with Spectralink
handsets in WMM QoS mode.
721-1001-000-AH.docx
December 2016
50
Hide quick links:
Advertisement
Table of Contents
