Using The Cli To View Clients - Cisco 2100 Series Configuration Manual
Wireless lan controller
Hide thumbs
Also See for 2100 Series:
- Configuration manual (50 pages) ,
- Quick start manual (12 pages) ,
- Configuration manual (406 pages)
Table of Contents
Advertisement
Viewing Clients
This page shows the following information:
•
•
•
•
•
Using the CLI to View Clients
Use these CLI commands to view client information.
•
•
•
Cisco Wireless LAN Controller Configuration Guide
7-78
The general properties of the client
The security settings of the client
The QoS properties of the client
Client statistics
The properties of the access point to which the client is associated
To see the clients associated to a specific access point, enter this command:
show client ap {802.11a | 802.11b} Cisco_AP
Information similar to the following appears:
MAC Address
AP Id
-----------------
------
00:13:ce:cc:8e:b8
1
To see a summary of the clients associated to the controller's access points, enter this command:
show client summary
Information similar to the following appears:
Number of Clients................................ 6
MAC Address
AP Name
----------------- ----------------- ------------- ---- ---- -------- ---- -----
00:13:ce:cc:8e:b8 Maria-1242
00:40:96:a9:a0:a9 CJ-AP1
00:40:96:ac:44:13 CJ-AP1
00:40:96:b1:fe:06 CJ-AP1
00:40:96:b1:fe:09 CJ-AP1
To see detailed information for a specific client, enter this command:
show client detail client_mac
Information similar to the following appears:
Client MAC Address............................... 00:40:96:b2:a3:44
Client Username ................................. N/A
AP MAC Address................................... 00:18:74:c7:c0:90
Client State..................................... Associated
Wireless LAN Id.................................. 1
BSSID............................................ 00:18:74:c7:c0:9f
Channel.......................................... 56
IP Address....................................... 192.168.10.28
Association Id................................... 1
Authentication Algorithm......................... Open System
Reason Code...................................... 0
Status Code...................................... 0
Session Timeout.................................. 0
Client CCX version............................... 5
Client E2E version............................... No E2E support
Status
WLAN Id Authenticated
-------------
---------
Associated
1
Status
Probing
Probing
Probing
Probing
Probing
N/A
Chapter 7
Controlling Lightweight Access Points
-------------
No
WLAN Auth Protocol Port Wired
N/A
No
802.11a 1
N/A
No
802.11a 1
N/A
No
802.11a 1
N/A
No
802.11a 1
No
802.11a 1
No
No
No
No
No
OL-17037-01
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
