Customized Web Authentication Login Page Example; Using The Cli To Verify The Web Authentication Login Page Settings - Cisco 2100 Series Configuration Manual

Choosing the Web Authentication Login Page
Enter save config to save your settings.
Step 10
Follow the instructions in the
Step 11
section on page 10-20

Customized Web Authentication Login Page Example

Figure 10-14
Figure 10-14

Using the CLI to Verify the Web Authentication Login Page Settings

Enter show custom-web to verify your changes to the web authentication login page. This example
shows the information that appears when the configuration settings are set to default values:
Cisco Logo..................................... Enabled
CustomLogo..................................... Disabled
Custom Title................................... Disabled
Custom Message................................. Disabled
Custom Redirect URL............................ Disabled
Web Authentication Mode........................ Disabled
Web Authentication URL......................... Disabled
This example shows the information that appears when the configuration settings have been modified:
Cisco Logo..................................... Disabled
CustomLogo..................................... 00_logo.gif
Custom Title................................... Welcome to the AcompanyBC Wireless LAN!
Custom Message................................. Contact the System Administrator for a
Custom Redirect URL............................ http://www.AcompanyBC.com
Web Authentication Mode........................ Internal
Web Authentication URL............................ Disabled
Cisco Wireless LAN Controller Configuration Guide
10-20
"Using the CLI to Verify the Web Authentication Login Page Settings"
to verify your settings.
shows an example of a customized web authentication login page.
Customized Web Authentication Login Page Example
Chapter 10 Managing User Accounts
Username and Password.
OL-17037-01