Cisco 2100 Series Configuration Manual page 410

Cisco Workgroup Bridges
Figure 7-10
The WGB field on the right side of the page indicates whether any of the clients on your network are
workgroup bridges.
Click the MAC address of the desired client. The Clients > Detail page appears (see
Step 2
Figure 7-11
The Client Type field under Client Properties shows "WGB" if this client is a workgroup bridge, and the
Number of Wired Client(s) field shows the number of wired clients that are connected to this WGB.
Step 3 To see the details of any wired clients that are connected to a particular WGB, follow these steps:
a. Click Back on the Clients > Detail page to return to the Clients page.
Hover your cursor over the blue drop-down arrow for the desired WGB and choose Show Wired
b.
Clients. The WGB Wired Clients page appears (see
Cisco Wireless LAN Controller Configuration Guide
7-38
Clients Page
Clients > Detail Page
Chapter 7 Controlling Lightweight Access Points
Figure 7-12).
Figure 7-11).
OL-17037-01