Appendix D
Troubleshooting
Check the File Info check box if you want the message logs to include information about the source file.
Step 7
The default value is enabled.
Step 8
Check the Proc Info check box if you want the message logs to include process information. The default
value is disabled.
Step 9
Check the Trace Info check box if you want the message logs to include traceback information. The
default value is disabled.
Click Apply to commit your changes.
Step 10
Click Save Configuration to save your changes.
Step 11
Using the GUI to View Message Logs
To view message logs using the controller GUI, click Management > Logs > Message Logs. The
Message Logs page appears (see
Figure D-2
To clear the current message logs from the controller, click Clear.
Note
OL-17037-01
Figure
D-2).
Message Logs Page
Configuring System and Message Logging
Cisco Wireless LAN Controller Configuration Guide
D-9