Using The Cli To Configure Client Reporting - Cisco 2100 Series Configuration Manual

Troubleshooting CCXv5 Client Devices
Figure D-7
This page shows the client profile details, including the SSID, power save mode, radio channel, data
rates, and 802.11 security settings.

Using the CLI to Configure Client Reporting

Using the controller CLI, follow these steps to configure client reporting.
To send a request to the client to send its profiles, enter this command:
Step 1
config client ccx get-profiles client_mac_address
To send a request to the client to send its current operating parameters, enter this command:
Step 2
config client ccx get-operating-parameters client_mac_address
To send a request to the client to send the manufacturer's information, enter this command:
Step 3
config client ccx get-manufacturer-info client_mac_address
To send a request to the client to send its capability information, enter this command:
Step 4
config client ccx get-client-capability client_mac_address
To clear the client reporting information, enter this command:
Step 5
config client ccx clear-reports client_mac_address
Cisco Wireless LAN Controller Configuration Guide
D-28
Profile Details Page
Appendix D Troubleshooting
OL-17037-01