Cisco 2100 Series Configuration Manual page 475

Chapter 8 Controlling Mesh Access Points
Figure 8-11
Hover your cursor over the blue drop-down arrow for the mesh access point antenna that you want to
Step 2
configure and choose Configure. The 802.11a/n Cisco APs > Configure page appears (see
Figure 8-12
Under the Antenna Parameters section, enter the antenna gain in 0.5-dBm units in the Antenna Gain
Step 3
field. For example, 2.5 dBm = 5.
Note
Step 4 Click Apply to commit your changes.
Step 5 Click Save Configuration to save your changes.
OL-17037-01
802.11a/n Radios Page
802.11a/n Cisco APs > Configure Page
Only external antennas have configurable gain settings. The value that you enter must match the
value specified by the vendor for that antenna.
Adding Mesh Access Points to the Mesh Network
Cisco Wireless LAN Controller Configuration Guide
Figure 8-12).
8-23