Cisco 2100 Series Configuration Manual page 97

Configuring Controller SettingsWireless Device
Access
This chapter describes how to configure settings on the controllers. It contains these sections:
Using the Configuration Wizard, page 4-2
•
Using the AutoInstall Feature for Controllers Without a Configuration, page 4-6
•
Managing the System Date and Time, page 4-10
•
Configuring 802.11 Bands, page 4-14
•
Configuring 802.11n Parameters, page 4-17
•
Configuring DHCP Proxy, page 4-22
•
Configuring Administrator Usernames and Passwords, page 4-23
•
Configuring SNMP, page 4-24
•
Changing the Default Values of SNMP Community Strings, page 4-25
•
Changing the Default Values for SNMP v3 Users, page 4-27
•
• Configuring Aggressive Load Balancing, page 4-29
• Configuring Fast SSID Changing, page 4-31
• Enabling 802.3X Flow Control, page 4-31
Configuring 802.3 Bridging, page 4-32
•
Configuring Multicast Mode, page 4-34
•
Configuring Client Roaming, page 4-40
•
Configuring IP-MAC Address Binding, page 4-44
•
Configuring Quality of Service, page 4-45
•
Configuring Voice and Video Parameters, page 4-52
•
Configuring EDCA Parameters, page 4-67
•
Configuring Cisco Discovery Protocol, page 4-69
•
Configuring RFID Tag Tracking, page 4-79
•
Configuring and Viewing Location Settings, page 4-84
•
• Configuring the Supervisor 720 to Support the WiSM, page 4-89
• Using the Wireless LAN Controller Network Module, page 4-91
OL-17037-01
C H A P T E R
Cisco Wireless LAN Controller Configuration Guide
4
4-1