Searching Wlans - Cisco 2100 Series Configuration Manual

Chapter 6 Configuring WLANsWireless Device Access

Searching WLANs

You can search for specific WLANs in the list of up to 512 WLANs on the WLANs page. This feature
is especially useful if your WLANs span multiple pages, preventing you from viewing them all at once.
Follow these steps to search for WLANs using the controller GUI.
On the WLANs page, click Change Filter. The Search WLANs window appears (see
Step 1
Figure 6-4
Perform one of the following:
Step 2
•
•
•
•
Click Find. Only the WLANs that match your search criteria appear on the WLANs page, and the
Step 3
Current Filter field at the top of the page specifies the search criteria used to generate the list (for
example, None, Profile Name:user1, SSID:test1, Status:disabled).
Note
OL-17037-01
Search WLANs Window
To search for WLANs based on profile name, check the Profile Name check box and enter the
desired profile name in the edit box.
To search for WLANs based on SSID, check the SSID check box and enter the desired SSID in the
edit box.
To search for WLANs based on their status, check the Status check box and choose Enabled or
Disabled from the drop-down box.
To close the Search WLANs window without making any changes, click the X in the upper
right-hand corner.
To clear any configured search criteria and display the entire list of WLANs, click Clear Filter.
Cisco Wireless LAN Controller Configuration Guide
Configuring WLANs
Figure 6-4).
6-7