Cisco 2100 Series Configuration Manual page 438

Performing a Link Test
Figure 7-23
Hover your cursor over the blue drop-down arrow for the desired client and choose LinkTest. A link test
Step 2
page appears (see
Note
Figure 7-24
This page shows the results of the CCX link test.
Note
Click OK to exit the link test page.
Step 3
Cisco Wireless LAN Controller Configuration Guide
7-66
Clients Page
Figure 7-24).
You can also access this page by clicking the MAC address of the desired client and then clicking
the Link Test button on the top of the Clients > Detail page.
Link Test Page
If the client and/or controller does not support CCX v4 or later, the controller performs a ping
link test on the client instead, and a much more limited link test page appears.
Chapter 7 Controlling Lightweight Access Points
OL-17037-01