Using The Cli To Debug Rfid Tag Tracking Issues - Cisco 2100 Series Configuration Manual

Chapter 4 Configuring Controller SettingsWireless Device Access
3.
4.

Using the CLI to Debug RFID Tag Tracking Issues

If you experience any problems with RFID tag tracking, use these debug commands.
•
•
OL-17037-01
To see a list of all RFID tags currently connected to the controller, enter this command:
show rfid summary
Information similar to the following appears:
Total Number of RFID
----------------- -------- ------------------ ------ ---------------------
RFID ID VENDOR
----------------- -------- ------------------ ------ ---------------------
00:04:f1:00:00:03 Wherenet HReap
00:04:f1:00:00:05 Wherenet HReap
00:0c:cc:5b:f8:1e Aerosct
00:0c:cc:5c:05:10 Aerosct
00:0c:cc:5c:06:69 Aerosct
00:0c:cc:5c:06:6b Aerosct
00:0c:cc:5c:06:b5 Aerosct
00:0c:cc:5c:5a:2b Aerosct
00:0c:cc:5c:87:34 Aerosct
00:14:7e:00:05:4d Pango
To see a list of RFID tags that are associated to the controller as clients, enter this command:
show rfid client
When the RFID tag is in client mode, information similar to the following appears:
------------------ -------- --------- ----------------- ------ ----------------
RFID Mac VENDOR
------------------ -------- --------- ----------------- ------ ----------------
00:14:7e:00:0b:b1 Pango
When the RFID tag is not in client mode, the above fields are blank.
To configure MAC address debugging, enter this command:
debug mac addr mac_address
Cisco recommends that you perform the debugging on a per-tag basis. If you enable
Note
debugging for all of the tags, the console or Telnet screen is inundated with messages.
To enable or disable RFID debug options, enter this command:
debug rfid {all | detail | error | nmsp | receive} {enable | disable}
where
all configures debugging of all RFID messages,
–
detail configures debugging of RFID detailed messages,
–
error configures debugging of RFID error messages,
–
: 24
Closest AP
HReap
HReap
HReap
HReap
cisco1242
cisco1242
HReap
cisco1242
Heard
Sec Ago Associated AP
35 AP0019.e75c.fef4
Cisco Wireless LAN Controller Configuration Guide
Configuring RFID Tag Tracking
RSSI Time Since Last Heard
-70 151 seconds ago
-66 251 seconds ago
-40 5 seconds ago
-68 25 seconds ago
-54 7 seconds ago
-68 245 seconds ago
-67 70 seconds ago
-68 31 seconds ago
-40 5 seconds ago
-66 298 seconds ago
Chnl Client State
1 Probing
4-83