Cisco 2100 Series Configuration Manual page 248

Configuring and Applying Access Control Lists
Figure 5-33
Choose the desired ACL from the ACL Name drop-down box and click Apply. None is the default value.
Step 3
Note
Click Save Configuration to save your changes.
Step 4
Applying an Access Control List to the Controller CPU
Follow these steps to apply an ACL to the controller CPU to control traffic to the CPU using the
controller GUI.
Choose Security > Access Control Lists > CPU Access Control Lists. The CPU Access Control Lists
Step 1
page appears (see
Cisco Wireless LAN Controller Configuration Guide
5-60
Interfaces > Edit Page
See Chapter 3 for more information on configuring controller interfaces.
Figure 5-34).
Chapter 5 Configuring Security Solutions
OL-17037-01