Cisco 2100 Series Configuration Manual page 562

Configuring Wired Guest Access
Click Apply to commit your changes.
Step 4
On the Interfaces > Edit page, enter the IP address, netmask, and gateway address for the interface (see
Step 5
Figure
Figure 10-17
In the Port Number field, enter a valid port number. You can enter a number between 0 and 25 (inclusive).
Step 6
Check the Guest LAN check box.
Step 7
Enter an IP address for the primary DHCP server.
Step 8
Click Apply to commit your changes.
Step 9
To create a wired LAN for guest user access, click WLANs.
Step 10
Step 11 On the WLANs page, choose Create New from the drop-down box and click Go. The WLANs > New
page appears (see
Cisco Wireless LAN Controller Configuration Guide
10-26
10-17).
Interfaces > Edit Page
Figure 10-18).
Chapter 10 Managing User Accounts
OL-17037-01