Example For Configuring The Traceroute Test - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
----End
Configuration Files
The configuration file of Router A is as follows:
#
sysname RouterA
#
dns resolve
dns server 10.3.1.1
#
interface Ethernet1/0/0
ip address 10.1.1.1 255.255.255.0
#
nqa test-instance admin dns
test-type dns
destination-address url server.com
dns-server ipv4 10.3.1.1
#
ip route-static 10.3.1.0 255.255.255.0 10.1.1.2
ip route-static 10.2.1.0 255.255.255.0 10.1.1.2
#
#
return

6.20.7 Example for Configuring the Traceroute Test

This part provides examples for configuring a traceroute test to check the connectivity between
the client and devices along the transmission path.
Networking Requirements
As shown in
Eth 1/0/0 on Router C.
Figure 6-9 Networking diagram of the Traceroute test
Router A
Issue 02 (2012-03-30)
Attempts number:1
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Destination ip address: 10.2.1.1
Min/Max/Average Completion Time: 1/1/1
Sum/Square-Sum Completion Time: 1/1
Last Good Probe Time: 2007-7-3 10:52:5.7
Lost packet ratio: 0 %
Figure 6-9, perform the Traceroute test on Router A to trace the IP address of
NOTE
AR150/200 is RouterA.
Eth1/0/0 Eth1/0/0
10.1.1.1/24 10.1.1.2/24
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Drop operation number:0
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
Router B
Eth2/0/0
10.2.1.1/24
6 NQA Configuration
Router C
Eth1/0/0
10.2.1.2/24
212