Checking The Configuration - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
l
l
If the events that correspond to the alarm upper limit and lower limit (event-entry1, event-
entry2) are not configured in the eventTable, an alarm does not occur even if the alarm conditions
are satisfied. (The alarm record is in the undercreation state rather than in the VALID state.)
If either the alarm upper limit event or the alarm lower limit event is configured, the alarm is
triggered once the conditions for an alarm are satisfied. (The alarm record is in the VALID state.)
Do as follows on the router that is monitored.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
rmon prialarm entry-number prialarm-formula description-string sampling-interval
{ absolute | changeratio | delta } rising-threshold threshold-value1 event-entry1
falling-threshold threshold-value2 event-entry2 entrytype { cycle entry-period |
forever } [ owner owner-name ]
The prialarmTable is configured.
----End

2.2.8 Checking the Configuration

After configuring RMON, you can view the traffic statistics collected by RMON.
Prerequisites
The configurations of the RMON are complete.
Procedure
l
l
l
l
l
l
----End
Issue 02 (2012-03-30)
Prialarm state period, in seconds. It must be larger than the sampling interval.
Two prialarm state types: Forever or Cycle. If Cycle is set, an alarm does not occur and the
entry is deleted after the specified prialarm state period.
Run the display rmon alarm [ entry-number ] command to view the RMON alarm
information.
Run the display rmon event [ entry-number ] command to view the RMON events.
Run the display rmon eventlog [ entry-number ] command to view the RMON event logs.
Run the display rmon history ethernet interface-number command to view the RMON
history information.
Run the display rmon prialarm [ entry-number ] command to view the information of the
RMON prialarmTable.
Run the display rmon statistics ethernet interface-number command to view the RMON
statistics.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 RMON Configuration
50