Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
l To perform the NQA test at the specified time, run the start at [ yyyy/mm/dd ] hh:mm:ss
l To perform the NQA test after a certain delay period, run the start delay { seconds second
----End
6.3.3 Checking the Configuration
After configuring the DHCP test, you can view the test result.
Prerequisites
The configurations of the DHCP Test function are complete.
Context
Procedure
Step 1 Run the display nqa results [ test-instance admin-name test-name ] command to view the test
results on the NQA client.
----End
Example
Run the display nqa results command. If the test is successful, the following is displayed.
l
l
l
For the DHCP test, you can also view the following statistics in the extended result:
l
l
l
l
l
l
l
<Huawei> display nqa results
Issue 02 (2012-03-30)
The test instance is started immediately.
[ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime
{ seconds second | hh:mm:ss } } ] command.
The test instance is started at a specified time.
| hh:mm:ss } [ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } |
lifetime { seconds second | hh:mm:ss } } ] command.
The test instance is started after a certain delay.
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
testflag is inactive
The test is finished
Completion:success
Number of times to disconnect with the server
Number of times of the timeout disconnection operations
Number of times the server in the busy state
Number of connections failed to be set up
Numbers of operations with wrong sequences
Number of the discarding operations
Number of times of wrong statistics collection operations
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
147
Advertisement
Table of Contents
