Netstream Configuration; Collecting The Statistics Of Rpf Traffic - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
About This Chapter
This chapter describes working principle of the NetStream and provides configuration examples.
7.1 Overview of NetStream
This section describes the working principle of NetStream.
7.2 NetStream Supported by the AR150/200
The AR150/200 supports the sampling of IPv4, and the packet output in v5, v8, and v9 formats.
7.3 Collecting the Statistics of IPv4 Unicast Original Traffic
This section describes how to collect statistics about IPv4 unicast traffic passing through an
interface.
7.4 Collecting the Statistics of IPv4 Multicast Original Traffic
This section describes how to configure the IPv4 multicast original traffic statistics collection.
7.5 Configuring the Aggregation Statistics About IPv4 Traffic
This section describes how to configure the statistics about IPv4 aggregation traffic passing an
interface.
7.6 Configuring the Flexible NetStream Feature
This section describes how to configure the Flexible NetStream feature to flexibly create
NetStream statistics according to records.

7.7 Collecting the Statistics of RPF Traffic

By configuring the RPF traffic statistics collection, you can collect the statistics on abnormal
traffic failed by RPF check.
7.8 Maintaining NetStream
This section describes how to clear the NetStream traffic statistics.
7.9 Example for Configuring NetStream
This section provides several configuration examples of NetStream.
Issue 02 (2012-03-30)
7

NetStream Configuration

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 NetStream Configuration
226