Huawei AR150/200 Series Configuration Manual page 117

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
# Set the maximum number of connection attempts to 5.
[Router-cwmp] cwmp cpe connect retry 5
# Set the close-wait timer of the Router to 100 seconds.
[Router-cwmp] cwmp cpe wait timeout 100
Step 5 Verify the configuration.
You can see the CWMP function status, URL of the ACS, user name and password, Inform
message sending status, interval for sending Inform messages, time when an Inform message is
sent, close-wait timer, and maximum number of connection attempts.
<Router> display cwmp configuration
CWMP is enabled
ACS URL:
ACS username:
ACS password:
Inform enable status:
Inform interval:
Inform time:
Wait timeout:
Reconnection times:
You can see the CWMP function status, URL of the ACS, user name and password, method to
obtain the URL of the ACS, status of the connection between the CPE and the ACS, and time
when the last connection is set up.
<Router> display cwmp status
CWMP is enabled
ACS URL:
ACS information is set by:
ACS username:
ACS password:
Connection status:
Time of last successful connection:
----End
Configuration Files
Configuration file of the Router
#
sysname Router
#
interface Ethernet1/0/0
ip address 10.1.1.1 255.255.255.0
#
cwmp
cwmp cpe inform interval enable
cwmp acs url http://www.acs.com:80/acs
cwmp acs username newacsname
cwmp acs password newacspsw
cwmp cpe username newcpename
cwmp cpe password newcpepsw
cwmp cpe inform interval 1000
cwmp cpe connect retry 5
cwmp cpe wait timeout 100
cwmp cpe connect interface Ethernet 1/0/0
#
return
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
http://www.acs.com:80/acs
newacsname
newacspsw
enabled
1000s
2011-01-01T20:00:00
100s
5
http://www.acs.com:80/acs
user
newacsname
newacspsw
connected
2010-12-01T20:00:00
4 CWMP Configuration
106