Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
6.17.1 Establishing the Configuration Task
Before configuring the system to send test results to the FTP server, familiarize yourself with
the applicable environment, complete the pre-configuration tasks, and obtain the required data.
This can help you complete the configuration task quickly and accurately.
Applicable Environment
In the test, the latest five test results can be saved by the system and earlier ones are overlapped.
Therefore, if the NM station does not perform result polling timely, test results are lost. You can
send the statistics on the test results that reach the capacity of the local storage or periodically
send the statistics to the FTP server for storage through FTP. This can effectively prevent the
loss of test results and facilitate the network management based on the analysis of test results at
different times.
Pre-configuration Tasks
Before configuring test results to be sent to the FTP server, complete the following tasks:
l
l
l
Data Preparation
To configure test results to be sent to the FTP server, you need the following data.
No.
1
2
3
4
6.17.2 Configuring Parameters for Connecting the FTP Server
This part describes how to set parameters for accessing the FTP server that receives the test
results, such as address of the FTP server and user name and password for accessing the FTP
server.
Context
Do as follows on the NQA client:
Procedure
Step 1 Run:
system-view
Issue 02 (2012-03-30)
Configuring the FTP server
Configuring a reachable route between the NQA client and the NM station
Configuring a test instance
Data
IP address of the FTP server
User name and password used for logging into the FTP server
Number of test results saved through FTP
Duration of saving test results through FTP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
192
Advertisement
Table of Contents
