Checking The Configuration - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface to send multicast NTP packets is specified.
Step 3 Run:
ntp-service multicast-server [ authentication-keyid key-id | version number ]*
The ID of the authentication key used by the NTP multicast server is configured.
For configuring the multicast client, see
----End

5.3.8 Checking the Configuration

After NTP security mechanisms are configured, you can view the configuration.
Prerequisites
The configurations of the NTP Security Mechanisms are complete.
Procedure
l
l
----End
Example
Run the display ntp-service status command to view the status of the NTP service.
<Huawei> display ntp-service status
clock status: synchronized
clock stratum: 2
reference clock ID: LOCAL(0)
nominal frequency: 60.0002 Hz
actual frequency: 60.0002 Hz
clock precision: 2^18
clock offset: 0.0000 ms
root delay: 0.00 ms
root dispersion: 0.00 ms
peer dispersion: 10.00 ms
reference time: 15:51:36.259 UTC Apr 25 2010(C6179088.426490A3)
Run the display ntp-service sessions [ verbose ] command to view the status of NTP sessions.
<Huawei> display ntp-service sessions
disper
********************************************************************************
15.6
Issue 02 (2012-03-30)
Run the display ntp-service status command to view the status of the NTP service.
Run the display ntp-service sessions [ verbose ] command to view the status of NTP
sessions.
source
[12345]127.127.1.0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuring the Broadcast
reference stra reach poll
LOCAL(0) 7
5 NTP Configuration
Mode.
now offset delay
1 64 2 - 0.0
124