Table of Contents
Advertisement
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
6.1.4 NQA Supported by the AR150/200
This part describes NQA test types and scheduling modes supported by the AR150/200.
Features Provided by NQA
l
l
l
l
l
l
l
l
l
l
Issue 02 (2012-03-30)
Cooperates with the NM Station:
– The NM Station can completely manage all NQA functions.
– Supports the NQA MIB.
– Supports the Disman-traceroute-MIB.
– Supports the Disman-NSLookUp-MIB.
– Supports the Disman-ping-MIB.
Supports multiple types of tests:
– ICMP test
– DHCP test
– FTP test
– HTTP test
– DNS test
– Traceroute test
– SNMP test
– TCP test
– UDP test
– UDP Jitter test
Jitter tests support the continuous sending of 3000 packets and support voice traffic
simulation.
Supports 64 tests.
Supports test task scheduling:
Implements the scheduling of test tasks to decrease the concurrent tasks on the device.
Supports the configuration of different start time and end time for a single test:
– Supports three modes of starting tests: immediate, timely, and delayed.
– Supports several modes of ending tests: automatic, immediate, timely, delayed, and
ending the test when the lifetime of the test expires.
Supports auto distributing the start time and the test interval when several tests are
performed at a time.
Supports the auto-delay function, with which the system resources can be effectively
utilized so that tests can be completed within a specified period.
Supports the collection of the uni-directional delay statistics and bi-directional delay
statistics. In addition, you can set a threshold and enable collecting statistics about the
packets in the test results that exceed the threshold.
Supports the collection of statistics on packet loss in one direction.
Supports dynamic reduction of test cases.
Supports the sending of the test results to the FTP server through FTP.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
141
Advertisement
Table of Contents
